cleaning & safety & protection & sterilization
193
Sweep function: the transducer system provides a
sweep cycle from 37 kHz to 34 kHz and back to 37 kHz
enabling a homogeneous field distribution.
Sweep function offers faster cleaning with improved
cavitation, increased distribution of ultrasonic energy.
Facilitate the ultrasonic wave crossing through themesh
wire basket for more effective cleaning of complicated
objects.
Degass function: accelerates the removal of gas
contained in cleaning solutions by pulsing short breaks in
the ultrasonic cycle which allows coalesced gas bubbles
to rise to the surface and burst.
Degass function allows the ultrasonic cleaner to work
much more effectively, since the ultrasonic waves can
pass more freely through liquid.
Ultrasonic cleaning is accomplished by the energy
released from the violent collapse of tiny vacuum-filled
bubbles.
Air bubbles and dissolved air in the freshly filled
cleaning liquid absorb ultrasonic energy and significantly
reduce the cleaning performance.
A degas mode accelerates the removal of gas
contained in cleaning solutions by pulsing short breaks in
the ultrasonic cycle which allows coalesced gas bubbles
to rise to the surface and burst.
Degass function allows the ultrasonic cleaner to work
much more effectively, since the ultrasonic waves can
pass more freely through liquid.
Before the start of each working day it is best to degas
the liquid in your ultrasonic cleaner tank.
Fill the tank to the limit and add a spoon of cleaning
detergent which helps to soften the water and assists
degass process.
Set heater thermostat to 60°C. After temperature is
achieved run unit on cleaning cycle for about 10 minutes.
Degassing will expel the air so that the unit operates
with optimum performance and effectiveness.
It is advised to degass your cleaner whenever you fill
the tank with fresh water.
Pulse function: activates the power so that power
increases by approximately %20 and offer inforcement of
the peak performance.
Pulse function offers faster cleaning with improved
cavitation, increased distribution of ultrasonic energy
eliminating the standing waves, facilitate the ultrasonic
wave crossing through the mesh wire basket and the
complicated objects to be cleaned.
New generation ultrasonic cleaners are features with
“sweep”, “degass”
and
“pulse”
functions.
BATHS -
“ultrasonic” - “with sweep & degass & pulse functions”
sweep function
degass function
what does degass means
how to degass an ultrasonic bath
pulse function
Comparison of
the generators
electric output
signals.
Comparison of
acoustic field
distribution inside
the liquid.
Sweep system
Sweep system
Traditional system
Traditional system
34 kHz
35 kHz
37 kHz