density & sedimentation & temperature & time & pH &weight measurement
220
Manufactured according to ISO 3507
standard.
For easy differentiation both the
body and the stopper carries the same
identification code number.
Featuredwitha stopper withexcellently
polished upper and lower ends.
Nominal volume and inscriptions are
printed with blue enamel.
Manufactured according to ISO 3507
standard.
For easy differentiation both the
body and the stopper carries the same
identification code number.
Calibrated together with the stopper
with a precision of 0,001 ml. Net volume
is engraved on the body.
Featuredwitha stopper withexcellently
polished upper and lower ends.
Nominal volume and inscriptions are
printed with blue enamel.
Manufactured according to ISO 3507
standard.
Featured with a thermometer of scale
range +10°C to +40°C, with scale 0,5°C.
For easy differentiation both the
body and the stopper carries the same
identification code number.
Calibrated together with the stopper
with a precision of 0,001 ml. Net volume
is engraved on the body.
Featuredwitha stopper withexcellently
polished upper and lower ends.
Nominal volume and inscriptions are
printed with blue enamel.
DENSITYBOTTLES
“non - calibrated”
DENSITYBOTTLES
“calibrated”
DENSITYBOTTLES
“calibrated with thermometer”
catalogue
number
023.01.005
023.01.010
023.01.025
023.01.050
023.01.100
volume
5ml
10ml
25ml
50ml
100ml
pack
quantity
1 piece
1 piece
1 piece
1 piece
1 piece
catalogue
number
023.02.005
023.02.010
023.02.025
023.02.050
023.02.100
volume
5ml
10ml
25ml
50ml
100ml
pack
quantity
1 piece
1 piece
1 piece
1 piece
1 piece
catalogue
number
023.03.005
023.03.010
023.03.025
023.03.050
023.03.100
volume
5ml
10ml
25ml
50ml
100ml
pack
quantity
1 piece
1 piece
1 piece
1 piece
1 piece
1 - Carefully weigh the empty and
well dried density bottle.
2 - Fill the bottle up to 2/3 of the neck
level while avoiding air bubbles.
3 - Adjust the bottle temperature to
20°C in a thermostatic bath.
Insert the stopper of the bottle
carefully. The capillary of the stopper
will discharge the liquid.
4 - Dry the body and the stopper
carefully by wiping with a tissue
paper. Pay attention not to remove
any liquid from the capillary tube.
5 - The liquid inside of the bottle
should exactly be at the same level
with the upper end of the capillary.
6 - Final step is weighing the filled
density bottle and calculating the
density.
how to use
density bottles