distilation & filtration & separation & sample preparation
174
Practical solution if mixing, emulsification, shredding or
chopping is required for small samples.
Easy to hold due to the light weight for one hand operation.
Can be used both hand-held or post mounted.
High torque motor with a variable speed adjustment enables
rapid and effective disruption of a wide range of samples.
Flexible configuration of different rotors and stators enables
the homogenisator adaptive to most applications.
Can rapidly homogenize samples inrange 0,1 ml to 50 ml or
1 ml - 250 ml of liquid depending on the rotor/stator type.
During operation, the sample is drawn into the core of the
homogenizer.
The material is repeatedly cycled through narrow slits in the
probe where it is rapidly disintegrated by high shear.
Maximum speed of 30.000 rpm rate reduces processing
time significantly.
Complete homogenization of samples is usually achieved
in a few seconds. Reliable results are assured with extremely
high presicion.
Smooth motor drive makes working very safe and
comfortable.
Smooth acceleration also prevents unnecessary spills. An
overload protection feature increases the life span of the motor.
Shafts, rotors and stators are constructed of quality AISI 316
stainless steel which is inert to agressive solutions
Assembly and disassembly of rotors can be done without
requirement of special tools.
Shafts, rotors, stators are not supplied as a standard
accessory. These should be ordered separately.
Speed control at 6 stages as 8.000, 12.000, 15.000, 18.000,
22.000, 30.000 rpm.
HOMOGENIZER -
“light duty”
catalogueno
621.11.001
voltage (V)
motor type
speed range (rpm)
dimensions /weight (mm/ kg)
frequency (Hz)
workingvolume (ml)
workingvolume (ml)
power (W)
speedcontrol
max. circum. speed (m/sec)
overloadprotection
noise level (dB)
max. viscosity (mPas)
protectionclass
optional accessories
permissibleambient
Temperature (°C)
permissible relative
humidity (%)
46 x 55 x 230 / 0,6
carbon brush motor
160
220
50
0,1 - 50 with shaft 621.11.050
1 - 250 with shaft 621.11.250
8000 - 30000
6 stage
6,3 - 14
5000
no
IP20
< 54
stand&bosshead&various shafts
0 - 40
85
For liquid / solidmedia
working volume: 0,1 - 50ml
621.11.050
Light duty homogenizer
is supplied without
bosshead,
clamp, stand and
rotor/stator set.
Stirrer stand is made from
powder coated cast steel.
Unique base design offers
very stable holding of the
assembled stirrer and also
possibility of getting close to
the stand rod.
Supplied complete with
12 mm diameter st. steel
support rod.
cat. no: 049.09.180
Bosshead manufactured
from steel with opening
distance of 0 - 20 mm.
cat. no: 615.01.012
Bosshead clamp is specially
suitable to hold light duty
homogenizer.
cat. no: 621.11.103
For liquid / solidmedia
working volume: 1 - 250ml
621.11.250