distilation & filtration & separation & sample preparation
175
Offers right solution for dispensing, homogenizing and
mixing of samples in larger volumes.
High torque motor with a variable speed adjustment enables
rapid and effective disruption of a wide range of sample
Flexible configuration of different rotors and stators enables
the homogenisator adaptive to most applications.
Can rapidly homogenize samples in 10 ml to 8.000 ml of
liquid depending on the rotor/stator type.
During operation, the sample is drawn into the core of the
homogenizer.
The material is repeatedly cycled through narrow slits in the
probe where it is rapidly disintegrated by high shear power.
Maximum speed of 30.000 rpm rate reduces processing
time significantly.
Complete homogenization of samples is usually achieved in
a few seconds.
Reliable results are assured with extremely high presicion.
Smooth motor drive makes working very safe and
comfortable.
Smooth acceleration also prevents unnecessary spills. An
overload protection feature increases the life span of the motor.
Shafts, rotors and stators are constructed of quality AISI 316
stainless steel which is inert to agressive solutions.
Assembly and disassembly of rotors can be done without
requirement of special tools.
Shafts, rotors, stators are not supplied as a standard
accessory. These should be ordered separately.
Speed control at 6 stages as 10.000, 12.000, 15.000, 18.000,
22.000, 30.000 rpm.
HOMOGENIZER -
“heavy duty”
catalogueno
621.12.001
voltage (V)
motor type
speed range (rpm)
dimensions /weight (mm/ kg)
frequency (Hz)
workingvolume (ml)
workingvolume (ml)
power (W)
speedcontrol
max. circum. speed (m/sec)
overloadprotection
noise level (dB)
max. viscosity (mPas)
protectionclass
optional accessories
permissibleambient
Temperature (°C)
permissible relative
humidity (%)
70 x 70 x 255 / 1,3
carbon brush motor
500
220
50
10 - 5000 with shaft 621.12.905
100 - 8000 with shaft 621.12.908
10000 - 30000
6 stage
22,7 - 36
10000
yes
IP20
< 72
stand&bosshead&various shafts
0 - 40
85
For suspension / emulsion
working volume: 10 - 5000ml
621.12.905
Heavy duty
homogenizer is
supplied without
bosshead, clamp,
stand and
rotor/stator set.
Stirrer stand is made from
powder coated cast steel.
Unique base design offers
very stable holding of the
assembled stirrer and also
possibility of getting close to
the stand rod.
Supplied complete with
14 mm diameter st. steel
support rod.
cat. no: 049.09.250
Bosshead manufactured
from steel with opening
distance of 0 - 20 mm.
cat. no: 615.01.012
Bosshead clamp and
beaker clamp are specially
suitable to hold heavy duty
homogenizer.
cat. no: 621.12.103
For stringy / fibrous working
volume: 100 - 8000ml
621.12.908